A space for 600mm apart from the walls in four directions (1000mm for the upper part) is required for the installation of a tank and for its inspection & maintenance.
MULTANK reserves the right to provide alternate skid base designs. We recommend and ideal concrete plinth size of 400mm (W) x 475mm (H) with maximum variance in height of not more than 2mm.
External Base frame designed to BS729 HDG and the specification for materials used by tank specification is:
| Tank Height | Main Frame | Sub Frame | Design According |
|---|---|---|---|
| 2.5M Below | Angle 75 X 75 X 6t C | Channel 75 X 40 X 5t | BS729 |
| 3.0 m & Above | Channel Frame 125 X 65 X 6t | Channel 75 X 40 X 5t | BS729 |
Based on PAD production
WIDTH: More than 400mm
HEIGHT: More than 600mm (Including Base Frame)
INTERVAL DISTANCE: Less than 1m max.
OUTLINE DIMENSION: W,L+400mm
Horizontality Degree: Less than 1/500(Maintains Smoothness at the upper part)
| MULTANK Sealant Tapes have following
features: • Excellent adhesion to a wide range of substrates • Good UV resistance • The foam component allows good compression without squeezing the sealant out of the joint • Good resistance to mild acids and alkalis • Can be repositioned during tank construction if applied foam-side down • Easy and accurate to use with little waste and no mess |
 |
|
| Sealing Tape | ||
 |
 |
 |
| Water Level Indicator: | Flanges | Ventilation |
| "MULTANK uses Level Indicator consists with a glass or transparent tube protected with Aluminum case having one safety valve in the bottom. The level indicators are available in all sizes up to 5 meters. | Flanges shall be of upvc type | "The air vents used by MULTANK are ABS material (50mm or 100mm) with PE insects guard |
 |
 |
|
| Roof Support. | Tie Rod | |
| “Used GRP / FRP which is same material for the panel, contains no rust and does have excellent mechanical strength” | All tie rod is a slender structural unit with PE \mesh coating used as a tie and (in most applications) capable of carrying tensile loads only. | |
 |
 |
|
| Internal Ladder : FRP/GRP (Optional SS) External LAdder: HDG (Optional SS) | Rubber Head Bolts: SS316/A4, Assembly Bolts: SS304/A2 & 316/A4, Bolts for Skid Base Frames: HDG | |
 |
 |
 |
 |
| Anchor Bracket (HDG) | Brass Socket | Wall Bracket (HDG/SS316) | |
 |
 |
 |
|
| Steel Skid Base – Channel HDG | External Mainframe (HDG) | Wall Bracket (HDG/SS316) | Partition Main Frame SS 316 |
